(Original instructions) ENGLISH
7
5. Rip fence
6. Mitre guage
7. Transportation wheels
8. On/Off switch
9. Leg stand
10. Bevel adjustment locking knob
11. Blade elevation handle
12. Leg stand locking knob
13. Blade tilting wheel
14. Locking handle for extension table
15. Locking handle for rip fence
16. Extension table
17. Spanner wrench
18. Guide rail
19. Push stick
20. Table insert
21. Groove (a)
21. Groove (b)
22. Overloaded protector
ASSEMBLY (Fig A1, A2, A3, A4)
There are three positions on the machine for different use,
standing, folding and transporting. The legs are locked using
twist knobs which lock/unlock in either direction and have a
central unlocked position.
1. Start with the saw standing on its wheels (A1), unlock the
upper legs. Swing up the legs and lock (A2) then unlock
the lower legs.
2. Lift the table from the end (A3), allowing the lower leg to
swing into place. Swing the leg fully into place and lock
(A4).
3. There is a adjustable spring leg as shown in Fig.A5. You
can rotate it clockwise or anti-clockwise for your desired
length. (A5)
LABELS ON TOOL
The label on your tool may include the following symbols:
Position of Date Code
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
PACKAGE CONTENTS
The package contains:
1 table saw
1 60T saw blade
1 Blade guard
1 Miter gauge
1 Rip fence
1 Extraction hose
1 Hose adapter
2 Spanner wrench
1 Push stick
1 Narrow Material Fence
1 Instruction manual
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (Fig. A)
This tool includes some or all of the following features.
1. Saw table
2. Blade guard
3. Riving knife
4. Saw blade
WARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear ear protection.
Wear safety glasses or goggles.
V Volts
Direct Current
A Amperes n
0
No-Load Speed
Hz Hertz
Class II Construction
W Watts
Earthing Terminal
min minutes
Safety Alert Symbol
Alternating
Current
/min.
Revolutions or
Reciprocation per
minute
A1
To Next Page
Loading...
