Stanley STP18 User Manual

STP18
Español 4
13
22
Português
English
M
ANUAL DE INSTRUCCIONES
M
ANUAL DE INSTRUÇÕES
I
NSTRUCTIONS MANUAL
ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
ADVERTÊNCIA: LEIA ESTAS INSTRUÇÕES ANTES DE USAR O PRODUTO.
WARNING: READ INSTRUCTION MANUAL BEFORE USING PRODUCT.
Español 8
Português 21
English 34

Stanley STP18 Specifications

General

Planing width	82 mm
Rebating depth	12 mm
No Load Speed	16000 rpm
Weight	2.8 kg
Planing depth	2 mm

Summary

Intended Use

SAFETY INSTRUCTIONS

General Power Tool Safety Warnings

General warnings preceding safety guidelines for safe operation.

Work area safety

Guidelines for maintaining a safe and organized workspace.

Electrical Safety

Precautions for safe electrical connections and usage.

Personal Safety

Recommendations for operator well-being and protective gear.

Power Tool Use And Care

Advice on proper operation and tool longevity.

ADDITIONAL SPECIFIC SAFETY RULES

Safe operation

Specific instructions for secure handling and operation.

Additional Safety Information

Further safety advice, including RCD usage.

RESIDUAL RISKS

Identification of inherent safety risks despite precautions.

LABELS ON TOOL

Explanation of on-tool pictographs and safety labels.

THE PACKAGE CONTAINS

FEATURES (FIG. A)

ELECTRICAL SAFETY

USING AN EXTENSION CABLE

Guidelines for selecting and using extension cords.

BEFORE USE

ASSEMBLY AND ADJUSTMENTS

TABLE EXTENSIONS (FIG. D)

Instructions for adjusting table extensions.

INSTALLING THE DUST CHUTE (FIG. E-H)

Steps for attaching the dust collection system.

DEPTH ADJUSTMENT (FIG. I)

How to read and utilize the depth adjustment scale.

To Set the Finished Thickness (Fig. B)

TURRET STOP (FIG. B, J)

TO SET THE MINIMUM DEPTH TO WHICH THE CARRIAGE CAN TRAVEL WITH THE TURRET STOP

Procedure for setting the turret stop for depth control.

OPERATION

Instructions for Use

General guidance for operating the thickness planer.

Controls and Indicators

Explanation of the ON/OFF switch and overload protector.

Depth Adjustment and Measurement

Using the material removal depth scale for accurate cuts.

ANTI-KICKBACK (FIG.Z)

How to check anti-kickback

Procedure for verifying the anti-kickback mechanism's functionality.

PLANING BASICS

Proper Planing Technique

Essential methods for efficient and safe wood planing.

To Plane Your Material

Step-by-step guide for planing workpieces.

SNIPE

Understanding and defining the planing defect known as snipe.

TO AVOID SNIPE

Methods to prevent snipe during the planing process.

TWISTED, CUPPED AND BOWED WOOD

To Plane Twisted Wood (Fig. M-O)

Instructions for planing wood with twisting defects.

To Plane Only Slightly Twisted Material (Fig. M)

Technique for planing slightly twisted wood.

To Plane Cupped Wood (Fig. N)

Method for planing wood with a cupped defect.

To Plane Bowed Wood (Fig. P)

Guidance for planing wood exhibiting a bowed shape.

MAINTENANCE

PERIODIC MAINTENANCE

Regular checks and cleaning schedule for the tool.

CHANGING BLADES (FIG. Q–U)

Procedure for replacing the cutter blades safely.

Tool Maintenance Procedures

Removing the Blades

Procedure for safely removing cutter blades.

Installing the Tool Tray

Steps for fitting the tool tray.

Replacing the Timing Belt

Guide for timing belt replacement.

Brush Assembly Removal

How to remove the brush assembly.

Notes

Service Information

TECHNICAL DATA