To Next Page
A
Arthur BirdJul 26, 2025
What to do if my Stanley STXH2000 won't start?
- AAmy VelazquezJul 26, 2025
If your Stanley Power Tool won't start, there are several possible causes: * The cord may not be plugged in. Ensure the tool is plugged into a working outlet. * A circuit fuse may be blown. Replace the circuit fuse. If the product repeatedly causes the circuit fuse to blow, discontinue use immediately and have it serviced at a STANLEY service center or authorized servicer. * A circuit breaker may be tripped. Reset the circuit breaker. If the product repeatedly causes the circuit breaker to trip, discontinue use immediately and have it serviced at a STANLEY service center or authorized servicer. * The cord or switch may be damaged. Have the cord or switch replaced at a STANLEY Service Center or Authorized Servicer.
General
