9
(Original instructions)
EN © 2016 English
EN
3
SAFETY RULES/RESIDUAL RISKS
3.1 SAFETY “DO NOTS”
3.1.1
Warning. DO NOT allow children to use the appliance; supervise them to ensure
that they do not play with it.
3.1.2
Warning. High pressure jets may be dangerous if incorrectly used.
3.1.3
Warning. DO NOT use the appliance with flammable or toxic liquids, or any
products which are not compatible with its correct operation. Use of the
appliance in a potentially inflammable or explosive atmosphere is forbidden.
3.1.4
Warning. RISK OF EXPLOSION. DO NOT use the appliance to spray flammable
liquids.
3.1.5
Warning. DO NOT point the water jet at people or animals.
3.1.6
Warning. DO NOT point the water jet at the unit itself, electrical parts or other
electrical equipment.
3.1.7
Warning. DO NOT use the appliance with people within its range of action unless
they are wearing protective clothing.
3.1.8
Warning. DO NOT point the jet at yourself or others to clean clothing or footwear.
3.1.9
Warning. DO NOT use the appliance outdoors when it is raining.
3.1.10
Warning. DO NOT allow children, incompetent persons or those who have not
read and understood the instructions to use the appliance.
3.1.11
Warning. DO NOT touch the plug and/or socket with wet hands.
3.1.12
Warning. DO NOT use the appliance if the electric cable is damaged. If the
electric cable is damaged, it must be replaced by the manufacturer, one of its
authorised Service Centres or similarly qualified persons in order to avoid a
safety hazard.
3.1.13
Warning. DO NOT use the appliance if a supply cable or important parts such as
the safety devices, high pressure hoses or gun are damaged.
3.1.14
Warning. DO NOT jam the trigger in the operating position.
3.1.15
Warning. Check that the data plate is affixed to the appliance; if not, inform your
dealer. Appliances without plates must NOT be used as they are unidentifiable
and potentially dangerous.
3.1.16
Warning. DO NOT tamper with or adjust the setting of the safety valve or the
safety devices.
3.1.17
Warning. DO NOT alter the original diameter of the spray head nozzle.
To Next Page
Loading...
