Need help?Do you have a question about the Stanley SXPW2601S and is the answer not in the manual?
General| Brand | Stanley |
|---|---|
| Model | SXPW2601S |
| Category | Pressure Washer |
| Language | English |
Use unleaded 91 petrol (no ethanol), handle with care, keep away from ignition sources.
Stop washer, remove keys, check for damage, and follow fire precautions.
Ensure assembly, proper shutdown, check for damage/leaks, avoid modifications, handle hot parts and recoil starter correctly.
Use only unleaded 91 petrol (ULP - 91RON) and NO ETHANOL. Do not use E10 or high octane fuels.
Use SAE 30W or SAE 15W-40 4-stroke motor oil. Check oil level daily; change every 50 hours or 3 months.
Check fuel/engine switch, spark plug lead, and unit for loose items before starting.
Instructions for filling the fuel tank with unleaded 91 petrol, with safety warnings.
Step-by-step guide to starting the pressure washer, including pre-operation checks and choke/fuel settings.
How to purge air from the system by squeezing the trigger and releasing it to stop water flow.
Steps for safely shutting down the pressure washer, including turning off water, fuel, and engine.
Procedure for safely draining used engine oil, with disposal advice.
Steps for adding engine oil, checking the level, and capacity.
Solutions for engine not starting, low pressure, or variable pressure output.
Fixes for pump sucking air and issues with detergent not being drawn up.
To Next Page
