Stanton ST.150 - General Specifications

SPECIFICATIONS
TURNTABLE SECTION
Starting Torque: More than 4.5kgf.com
Motor: 16pole, 3phase, brushless DC motor
Platter: 332mm dia. Aluminum diecast
Pitch:
Brake:
TONE ARM SECTION
Tone arm type Static balanced S -shaped tonearm
straight with detachable headshell
Effective Arm Length 230mm
Tracking Force Adjust Range 0-3g
Applicable Cartridge Weight 13-18g
Frequency Response 20 - 20 KHz
Channel Separation More than 15 dB
Channel Balance Within 2.5dB at 1 KHz
Wow & Flutter: Less than 0.1% WRMS
(JIS WTD) with 33 1/3rpm
S/N ratio: More than 60dB (DIN-B)
Needle Pressure range 2-5g
GENERAL SPECIFICATIONS
Dimensions: 450(W) x 353 (D) x 146 (H)mm
Weight: 16.4Kg
Power supply: Single Voltage:
Power consumption: 14W
AC 120V, 60Hz (For U.S.A.,Canada,Mexico)
AC 230V, 50Hz (For Europe,New Zealand,South Africa,Singapore,Israel)
AC 240V, 50Hz (For Australia,U.K.)
AC 100V, 50Hz (For Japan)
AC 220V, 50Hz (For United Arab Emirates,Chile,Argentina)
AC 220V, 60Hz (For Philippines)
AC 110V, 60Hz (For Taiwan)
+/-8%,+/-25%,+/-50%
Electronic Brake
4