page 22 page 23
Basic Operation
J. Setting Parking Brake
4 Long, 4+2, Lied 4+2
To engage the parking brake, push far le brake pedal down and apply
pressure until vehicle is secured. The instrument display panel will
display a brake symbol, the vehicle is now secured and motor power is
shut down. Power will not start until brake is released.
Please note: That the parking brake has multiple clicks, be sure to set
the brake according to the incline of the vehicle. If any doubt; be sure
to set the brake to the furthest position to properly secure the vehicle.
To Next Page
Loading...
