KEEP WARM
Bread can be automatically kept warm for 1 hour after baking. During keeping
warm, if you would like to take the bread out, switch the program off by
pressing the START/STOP button.
NOTE: The programs of DOUGH and JAM do not have the function of keep
warm.
MEMORY
If the power supply has been interrupted during the course of making bread,
the process of making bread will be continued automatically within 10 minutes,
even without pressing START/STOP button. If the interruption time exceeds 10
minutes, the memory cannot be kept, you must discard the ingredients in the
bread pan and add the ingredients into bread pan again, and the bread maker
must be restarted. But if the dough has not entered the rising phase when the
power supply breaks off, you can press the START/STOP directly to continue
the program from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperature, but there may be
any difference in loaf size between a very warm room and a very cold room.
We suggest that the room temperature should be within the range of 15℃ to
34℃.
WARNING DISPLAY
1. If the display shows “HHH” after you have pressed START/STOP button, 5
beeps will be heard, it prompts that the temperature inside is still too high.
And the program will not be performed. Open the lid and let the machine cool
down for 10 to 20 minutes.
2. If the display shows “LLL” after you have pressed START/STOP button, 5
beeps will be heard, it means that the temperature inside of bread pan is too
low. The bread maker shall be placed into environment of higher
temperature for use (Except the program of BAKE).
3. If the display shows “EE0” after you have pressed START/STOP button,
beeps will be heard, it means the temperature sensor open circuit, press
START/STOP button to stop beeps sound, but the “EE0” in the LCD will
continue flashing, please check the sensor carefully by Authorized expert. If
the display shows “EE1”, it means the temperature sensor short circuit
BEFORE THE FIRST USE
The appliance may emit a little smoke and a characteristic smell when you turn
it on for the first time. This is normal and will soon stop. Make sure the
appliance has sufficient ventilation.
1. Please check whether all parts and accessories are complete and free of
damage.
10
To Next Page
Loading...