Star Micronics IFBD-HE07 - Lpr;Lpd

IFBD-HE0708 BE07 User’s Manual
3-6
3.1.2. LPR/LPD
The LPR protocol supported by the LPD of this product conforms to RFC1179 (partially unsupported). The list of logic printer
names is handled as the queue name. LPR is an acronym for Line PRinter daemon protocol. It was originally a printing protocol
prescribed as a UNIX printing system. Currently, it is supported as standard on Windows (NT and later).“LPR” is sometimes used
asanexecutionlenameoftheLPRprintingutilitysoftware.
The print server (Daemon) that supports LPR is called an LPD (Line Printer Daemon).
LPD uses TCP communication port 515.
 The reception buffer for print data is 1 M bytes (shared with Raw Socket Print).
 It does not support burner printing.
 Set to “Ip” on the PC-port settings when specifying a queue name.
Enable this if the LPR byte counter-added enable/disable can be selected.
 See section 5.3 Driver Support Table for details on support by Star Micronics’ drivers.
 If you are using a standard Windows TCP/IP printer port and a CUPS (UNIX, Linux, or Mac) driver, see section
5.3 Driver Support Table for important notes.
 Since there are additional instructions when using a Windows standard TCP/IP printer port or a CUPS (UNIX/
Linux, Mac) driver,See "5.3 Driver Support Table".