Star Micronics IFBD-HE07 - WebPrint Settings; SSL;TLS Settings

IFBD-HE0708 BE07 User’s Manual
3-42
Note7: TCPSYNTimeout/IntervalspeciestheSYNACKoutputretryconditionsifthereisnoACKresponsefrom
the host (PC) to the SYN ACK from the server (this NIC) when the TCP connection is accepted (SYN receiv-
ing). Supported by Ver 3.3.0 and later.
<Normal> <Waiting for an ACK response>
TCP SYN Timeout
ＳＹＮ
ＳＹＮ ＡＣＫ
PC
Printer(TCP Server)
ＡＣＫ
ＳＹＮ
ＳＹＮ ＡＣＫ
ＳＹＮ ＡＣＫ
ＳＹＮ ＡＣＫ
RST
PC
Printer(TCP Server)
TCP SYN Interval
TCP SYN Interval
・
・
Note 8: This setting is only available for Telnet and FTP. Supported by Ver 3.4.0 and later.
3.3.3. WebPrint Settings (IFBD-HE07X/08X/BE07X only)
StarWebPRNT Function is set up.
This setting is stored in the product’s non-volatile memory.
See “4. StarWebPRNT Function” for more details.
Setting Items Input Range(Note 1) Initial Value (Factory Default)
TCP Port Number • 1-65535 80
Note 1: Port numbers that are also used by other services cannot be used. “Well-known” ports are not
recommended.
3.3.4. SNMP Settings
CongurethesettingsforSNMP.ThissettingisforwebandTelnetonly.ItissupportedbeginningfromF/WVer.5.0.0orlater.
Refertosection3.1.12.1“SNMPcongurationparameters”.
3.3.5. SSL/TLS Settings
CongurethesettingsforSSL/TLS.ThissettingisonlyavailableforWEBsites.SupportedbyVer4.0.0andlater.
Selected Items Setting Items Input Range Default Value (Factory Default)
SSL/TLS Setting SSL/TLS ENABLE/DISABLE DISABLE
TCP Port Optional 443
Certicate Self-Signed/CA Signed Self-Signed
Create Self-Signed Certifacate -
ImportCA-SignedCerticate -
3.3.6. Network Card Information Display
DisplaystheNICmainrmwareversion,bootloaderversionandPLDrevision.
Display Example