IFBD-HE0708 BE07 User’s Manual
6-6
6.3.2. Card Reader/Writer
This product with F/W Ver.5.0.0 and later does not support card reader/writer products. Use the product with Ver. 4.X.X or earlier.
Model VisualCardOCX1.9.0 Setup StarNIC V3.0
TCP300II
ΔNote*1 ○Note*2
TCP400
ΔNote*1 ○Note*2
Note*1 You must change the #9100 Multi-session setting for IFBD-HE07/08/BE07 to Valid.
To change settings, see sections 3.1.6 HTTP Server, 3.1.7 TELNET Server, and 3.1.8 FTP Server.
Note*2 Uses Windows XP, Vista, 7, 8 and 8.1.
6.3.3. How to Set the IP Address
OS Setting Tool Remarks
Windows
Printer Connection Wizard
(6.3.1.1 StarPRNT Inteligence CD)
• You can search for printers that do not have an IP address in environments that do not pass through a
DHCP server, using a combination of IFBD-HE07/HE08/BE07 Ver. 2.2.0 or later and StarPRNT Intelligence
Ver2.0 or later. For earlier versions, you cannot search for printers that do not have an IP address in environ-
mentsthatdonotpassthroughaDHCPserver.Select“Help-Cannotndprinter”,andthenfollowthesteps
to setup a temporary IP address.
Star Setting Utility
(6.3.1.2 Star Printer Driver CD)
• If you use Windows Vista or 7 in an environment that does not go through a DHCP server, you cannot
search for printers that have not been set with an IP address.In such cases, set the TCP/IP address on the
printer after reading Guidelines for Using an Ethernet Environment in the printer’s software manual.
• Uses Windows XP, Vista (32 bit) and 7 (32 bit). Windows 64 bit OS is not supported.
Setup StarNIC V3.0
• If you use Windows Vista, 7, 8 or 8.1 in an environment that does not go through a DHCP server, IFBD-
HE07, HE08 or BE07 with Ver2.1.0 or earlier cannot search for printers that have not been set with an IP
address. In such cases, set the TCP/IP address on the printer after reading Guidelines for Using an Ethernet
Environment in the printer’s software manual.
• Uses Windows XP, Vista, 7, 8 and 8.1.
LInux - See the driver manual.
Mac - See the driver manual.
To Next Page
Loading...