Star Micronics IFBD-HE07 - Page 64

IFBD-HE0708 BE07 User’s Manual
6-5
6.3.1.6. When Using a Standard Windows TCP/IP Printer Port
If, for printing, you are using a standard TCP/IP printer port with a printer driver that is not listed in 6.3.1.1. or 6.3.1.2. above, select LPR.
ThefollowingexampleshowshowtocongurethesettingsinWindows7.
The port monitor LPR settings are below. Always specify the queue name.
 •Queuename:Ip
• Apply a check mark to “Enable LPR Byte Counter”
(Reference Example 1) Example of Port Monitor Setting Screen (For Windows 7)