FT5X User Guide
4.4.7 Hotline call number
1． Set the hotline call number
Command：#*65*hotlineNumber#
Description：Set the hotline call number ，hotlineNumber is the hotline call number.
2． Set the hotline dialing time
Command：#*66*seconds#
Description：Set the time from picking up to auto-sending the hotline number by the
device. Seconds（0～10）is the time that defined by user. It indicates that the user do
not dial the number after picking up, the device will dial the hotline number after
Seconds automatically. If Second is 0, that indicate the hotline dialing function has
been off.
4.4.8 Emergency call number
1． Set the emergency call number
Command：#*67*n#
Description: set the emergency call number, the number could be sent out without SIM
card. No more than 12 numbers.
2． Set the function of number 112
Command：#*672*n#
Description：n=1, the all emergency call numbers have been set will be instead by
112; n=0 do not instead by 112.
3． Delete the emergency call number
Command：#*670#
Description：delete all the emergency call number that have been set.
26/31
To Next Page
Loading...