FT5X User Guide
Under Extra initialisation commands enter the following text exactly as it appears here:
AT+CGDCONT=1,”IP”,”APN”
Where APN is the access point name provided by the Network operator.
Click OK to confirm the settings
Click OK to exit the Phone and Modem options screen.
Configure connection:
Refer to the section 4.3.2 Connecting to the Internet for instructions on setting up an internet
connection. Right-click the connection and choose Properties. Click Configure and change the
modems Maximum Speed to 115200bps. Click OK.
When prompted for a Username and Password enter the Username and Password provided by
the Network Operator. When prompted for a phone number use the following number for a
GPRS connection exactly as it appears here:
*99***1#
22/31
To Next Page
Loading...