To Next PageTo Next Page
Need help?Do you have a question about the Star-net FT5X and is the answer not in the manual?
General| Category | Gateway |
|---|---|
| Ethernet Ports | 4 |
| Frequency Band | 2.4 GHz, 5 GHz |
| WAN Port | 1 |
| USB Port | 1 |
| Power Supply | 12V DC |
| Model | FT5X |
| Wi-Fi Standard | 802.11ac |
Lists the features and capabilities of the FT5X device, including voice access, fax, data, and routing.
Details the GSM frequency bands supported by the FT5X device.
Specifies the transmission power levels for EGSM 900 and GSM 1800.
Outlines the operating frequency ranges for EGSM 900 and GSM 1800.
Indicates the average power consumption of the FT5X unit.
Details the input and output specifications for the device's power supply.
Provides information about the battery type, standby, airtime, and charging.
Lists the various ports available on the FT5X for connectivity.
Specifies the electrical characteristics of the phone port.
Details the operating and storage conditions for the FT5X.
Provides the physical dimensions and weight of the FT5X.
Warns about using the device in restricted areas and potentially hazardous environments.
Provides safety instructions for handling and disposing of the device's battery.
Describes the various ports and connectors on the back plane of the FT5X.
Explains the function of the LED indicators on the front panel of the FT5X.
Provides a step-by-step guide for physically installing the FT5X unit.
Describes how the FT5X is used for voice calls via GSM and PSTN networks.
Explains the FT5X's functionality for voice, fax, and modem connections.
Details how to connect Point of Sale (POS) terminals using the FT5X.
Illustrates how the FT5X can be used in a PBX system for call routing.
Explains how the FT5X extends PBX functionality to individual extensions.
Covers making, receiving, managing calls, call waiting, and conference calls.
Details how to divert incoming calls from PSTN to GSM and vice versa.
Explains how to send and receive faxes using the FT5X.
Covers using the FT5X for data transmission, including POS and modem functions.
Describes how to configure and use the FT5X as a modem for GPRS applications.
Step-by-step guide on installing the FT5X modem drivers on a PC.
Instructions for setting up an internet connection using the FT5X.
Steps to terminate an active internet connection.
Detailed steps for configuring the FT5X for GPRS internet access.
Commands for configuring system settings, fax modes, call diverts, GSM network, and SIM card.
Commands for configuring fax receiving and sending modes.
Commands for setting up call diversion from FXO to GSM and vice versa.
Commands to detect and set the caller ID identification standard.
Commands to configure the serial port mode for CLI or Modem.
Commands for managing SIM card PIN and PUK codes.
Commands to set and configure hotline call numbers and dialing times.
Commands for setting and managing emergency call numbers.
Commands for configuring GSM network features like call diverting and restrictions.
Addresses initial status indicators and readiness for making calls or faxes.
Warns about incorrect connections and potential damage to the unit.
Addresses common issues with fax identification tones and data call types.
Clarifies SIM card requirements and compatible fax machine standards.
Explains limitations regarding GSM fax and voice/fax switching.
Outlines the terms and duration of the product's warranty.
Lists important notes regarding warranty coverage, validity, and exclusions.
Provides a template for the customer to fill out for warranty claims.
