p/n 2M-Z19504 Owners Manual DW, DWN Drawer Warmer Series
11
MAINTENANCE
ADJUSTMENTS AND LUBRICATION
PRECAUTIONS: Turn control knob to OFF. Unplug warmer
Allow drawers to cool before proceeding.
Remove drawer pans and Humitrol racks
FREQUENCY: Minimum - monthly.
Every 2 weeks recommended.
TOOLS: Screwdrivers, Phillips (+) and at blade (-).
Nut drivers, 3/8” and 7/16”.
Food-grade lubricant.
1. Check slides on cabinet and drawers for cleanliness.
2. Check all rollers on cabinet and drawers for cleanliness and tightness. Lubricate.
3. Check cabinet drawer stops for operation. Stops must “snap” down positively. Clean and adjust
as required.
4. Check cabinet heating element fasteners for tightness.
5. Check all cabinet drawer catches for tightness and operation. Lubricate. Be certain roller is “out”
before attempting to install drawer.
6. Check thermostat thermobulb and capillary tube for condition. Thermobulb must be securely
mounted in the appropriate holder. Arrange repairs for damaged thermobulb or capillary tube.
7. Check drawer faceplate and handle fasteners for tightness.
8. Check drawer catch clip for tightness.
9. For drawers equipped with gaskets, examine condition of gasket. Arrange repairs for torn or
damaged gaskets.
10. Reinstall drawers and check for proper operation.
Procedure is complete.
To Next Page
Loading...
Need help?
General
