4
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Installation Time: 5 hours for non-hidden installation or additional xtures.
Tools Required for Assembly (not included): tape measure, pipe tape, hacksaw, flathead screwdriver,
2-step PVC glue system (primer and sealer), hydraulic cement or other material
Part Description Quantity
A Rear ush toilet 1
B Toilet tank, lid & gasket 1
C
1/2 HP mini-grinder pump unit
with discharge ttings 1
D 2 in. x 1 in. 90° discharge tting 1
E 1-1/2 in. vent tting 1
F Rubber coupling 1
G Clamps for rubber coupling 2
H Toilet hardware pack 1
J* Installation instructions 1
*Not Shown
PREPARATION
Parts Required For Assembly (not included): ,Discharge pipe and fittings per code, vent pipe and
fittings per code, ball valve or gate valve, union, water supply line, closet screw sets designed for
cement, 2 step PVC gluing system, check valves.
NOTE: For installations with pump unit hidden behind a wall, purchase extension kit 023260.
PACKAGE CONTENTS
SPECIFICATIONS
A
B
C
D
E
IL1729
F
G
H
Model HP Volts Amps
Gallons Per Hour Lift Capacity
5 ft. 10 ft. 15 ft. 20 ft. 25 ft.
S1201/S1202/
S1203
1/2 115 7 2700 2400 2100 1620 960
Recommended for installations up to 20 ft. total dynamic head. Consult factory if installation is
above 15 ft. vertical height in 1 in. pipe.
NOTE: For installations with pump unit hidden behind a wall,
purchase extension kit 023260.
IL1764
To Next Page
Loading...