11
EXPOSED PUMP UNIT INSTALLATION
3. Lightly mark the locations of the grinder/tank unit, toilet
and closet screw set locations on the floor.
Grinder Pump Unit Location
Closet
Screw Set
Locations
3
4. Lightly mark the wall with the height of the grinder/tank
unit and the bottom and sides of the toilet tank to prevent
interference from pipe runs during pipe installation.
Remove the toilet from the grinder/tank unit and set it
aside until piping is installed.
Grinder/
tank unit
Toilet Tank Bottom and Sides
IL1743
4
To Next Page
Loading...