SK2678: PSC14D Tabletop Split Lid Two-Sided Grill
Right Side (Timer only):
1. To Change the time on the right side, press and hold the "TEMP" button, and press and hold any
program button on the right for one second. The LED above the program button will light and
the Right Display will read "_ _ _ _." Enter the four-digit security code sequence, 4, 3, 2, 1. The
security code will not show on the display. Once the correct sequence has been entered, the
preset time will be displayed and the LED for that program will begin to ash.
2. Set the time with the "+ or -" buttons.
3. Press the "TEMP" button to save the time.
4. The LED will stop ashing but will remain lit.
5. Press any other program button within 15 seconds to continue programming without re-entering
the security code.
6. While programming a program (LED is ashing), if no input is received for 15 seconds, the unit
will revert to normal operation and the security code must be re-entered.
Operation:
1. Pressing any program button (1-4) will start the timer countdown and display the preset time
remaining. The LED for the appropriate program will be lit during countdown and remain lit until
another program is selected.
2. When the display reaches "00:00", the buzzer will sound and the digits will ash.
3. Press the program button to silence the buzzer and return the readout to programmed time.
4. The right and left sides will operate independently of each other. Both timers can be in operation
at the same time. The "00:00" display will show which side is timed out.
MONTHLY INSPECTION
Check all bolts/screws and tighten if necessary.
To Next Page
Loading...
Need help?
General
