BASIC OPERATION
18 19
H. SETTING PARKING BRAKE (4 Long, 4+2 and 4+2 Lifted)
To engage the parking brake, push far left brake pedal down and
apply pressure until vehicle is secured. The instrument display panel
will display a brake symbol, the vehicle is now secured and motor power
is shut down. Power will not start until brake is released.
Please note: Be sure to set the brake according to the incline of the
vehicle. If any doubt; be sure to set the brake to the furthest position to
properly secure the vehicle.
BRAKE PEDAL IN TOP POSITION
BRAKE PEDAL DOWN TO SECURE VEHICLE