CHARGING THE BATTERY
60 61
Lester Summit II 1050W 22 Amp Charger:
The Lester Summit II is a 1050W Industrial Battery Charger designed
with a rugged die cast aluminum enclosure (sealed to IP66 standards)
for high reliability and long life. The charger comes with many different
charging algorithm profiles loaded, for lead acid and lithium batteries.
*1050W (Lithium) and 650W (Lead Acid)
2. Important Things to Remember
• Become familiar with and follow the instructions issued by the
charger manufacturer.
• Always charge the battery after each use.
• Lead acid batteries do not develop a memory and need not be
fully discharged before recharging.
• Charge only in well-ventilated area. Keep sparks or flames away
from a charging battery.
• Verify charger voltage settings are correct if applicable.
• Regularly check electrolyte level inside each individual battery.
• Tighten all vent caps before charging.
• Do not overcharge or undercharge the batteries using other means.
Use only the charging equipment provided.
• Do not charge a frozen battery.
• Avoid charging at temperatures above 122°F (50°C).
Visit starev/software to download the Lester Charger App for
more information.
To Next Page
Loading...
