- 19 -
2.3 Loading Paper
Refer to “4.2 Recommended Paper (Common thermal roll paper)” of Page 34, to select roll paper
that conforms to the specications.
1. Turn on the printer.
2. Put your nger on the switch for opening the cover, and then open and raise the printer cover.
3. Load the roll paper in the orientation shown in the gure below, and then pull the end of the roll
straight toward you.
4. Press down on both sides of the printer cover to close it rmly.
When you close the printer cover, make sure that it is closed on both sides.
5. Use the tear bar to cut the extra paper.
CAUTION
When the paper is jammed, be sure to open the printer cover before removing the jammed
paper.
Do not under any circumstances try to pull out the jammed paper forcefully while the printer
cover is closed. Doing so may damage parts of the printer.
Printer Cover
Cover Open Switch
To Next Page
Loading...
