Star SM-T300I Series - Paper; Paper Specifications; Recommended Paper; Printing Range

3.75 mm
3.75 mm
72 mm Printing Area
79.5±0.5
mm Paper Width
CAUTION
1) Do not use roll paper whose end is glued to its core, because the printer will be unable to prop-
erly detect the end of the paper. Also, we recommend that you use roll paper that has a roll end
mark at its end.
2) Chemicals and oil may cause the roll paper to change color or cause the printed characters to
become lighter.
3) The roll paper starts changing color at approximately 70°C.
Please be aware that the roll paper can be aected by heat, humidity, and direct sunlight.
4) The roll paper may change color if you scratch it with your ngernail, a hard piece of metal, etc.
- 34 -
4. Paper
4.1 Paper Specications
Type : Thermal Paper
Paper width : 79.5±0.5 mm
Paper thickness : 61 to 75±5
µm
Outer diameter : Ø50 mm or less
Core shaft inner diameter : Ø12 mm or more
Core shaft outer diameter : Ø18 mm or more
Recording side : Outside of roll
4.2 Recommended Paper (Common thermal roll paper)
Manufacturer Product Name Paper thickness
Mitsubishi Paper Mills Limited P220AG 65μm
Oji Paper Co., Ltd.
PD450 65μm
PD160R 75μm
PD160R-63 63μm
Domtar
(Appvion)
Domtar POS 55H-2.4
(Alpha 800-2.4)
61μm
4.3 Printing Range