Star SP712 Series - 11 RS-232 C Serial Interface; Interface Specifications

– 45 –
11. RS-232C Serial Interface
MARK “1”
A: Start bit
B: Data bit
C: Parity bit
D: Stop bit
11-1. Interface Specifications
1 Data transmission method: Asynchronous serial interface
2 Baud rate: Selectable from 4800, 9600, 19200, 38400 bps
(Refer to “10. DIP Switch Setting”.)
3 Word length Start bit: 1 bit
Data bit: 7 or 8 bits (selectable.)
Parity bit: Odd, even or none (selectable.)
Stop bit: 1 bit length
4 Signal polarity RS-232
MARK: Logic “1” (–3V to –15V)
SPACE: Logic “0” (+3V to +15V)
! " # $
B B B B B B B B
SPACE “0”