1. Purpose
SF-HC25G plasma cutting torch height controller is specially designed for
portable plasma cutting machine cutting torch height automatic control
module.
SF-HC25G plasma cutting torch height controller, simple operation, convenient
debugging, affordable, adopts digital control, reliable performance. It is an
ideal product of form a complete set of welding equipment manufacturers.
Adopt the host and the panel split type structure, especially suitable for
portable cutting machine.
1.2 Important statement
SF-HC25G plasma cutting torch height controller and the content of the
manual may be there are some differences, please in kind prevail. After this
product or its accessories have any changes, without prior notice. Need to
refer to update content.
Please be sure to read the safety warnings and precautions, so as to avoid
improper use lead to dangerous accidents.
Before install anduse this product, must be strictly carried out in accordance
with the details of the product system manual operation, in order to ensure the
correct use of the product.
About SF-HC25G plasma cutting torch height controller and the contents of
this manual, be carried out if any specific illegal use, do not represent the
position of the company, and refused to acknowledge its legal liability, the
consequences shall be borne by the users.
Safety warning is used to prevent the human body and property damage.
In the use of SF-HC25G cutting torch height controller, if there is any quality
problem, consumers can contact our service center or authorized office,
dealers, agents to get the corresponding products and services.
Without the explicit written permission to use any of this information may not
be copied, reproduced or content, the offenders will be fully liable to damage.
1.3 Warning
To safe operation of this product, and achieve the design of the product control
accuracy, to avoid damage to its, carefully read the related warning and strictly
abide by it.
To Next Page
Loading...
