8. Removal Handle
Insertion and Removal
To insert the hearing aid:
1. Gently wrap the hearing aid over your ear until it rests securely behind your ear
2. Insert the earmold into your ear canal
3. Softly press the earmold into place with your fingertip.
To remove the hearing aid:
1. Gently grasp the cable at the opening of the ear canal with your thumb and forefinger
2. Gently pull the earmold out of your ear canal
3. Remove the hearing aid from behind your ear
Batteries
Your hearing aid uses a battery as its power source. To insert or replace the battery:
1. Use the finger pick to gently open the battery door.
2. Remove the old battery.
3. Remove the colored tab from the new battery. For best results, wait 3-5 minutes after removing the tab before
inserting the battery.
4. Insert into the battery door, “+” side up.
5. Close the battery door.
To Next Page
Loading...
