8 9
ON, OFF AND VOLUME CONTROL
Before placing the BTE with an earmold into your ear,
be sure the battery is inserted and the battery door is
closed securely.
To insert the earmold, hold it with your thumb
and forefinger on the outer side near the tubing.
Gently insert the canal tip into your ear canal.
Then gently press the earmold
into place with your finger.
Carefully place the instrument
over the top of the ear until it
rests securely in place.
To remove, take the instrument
from behind your ear and
gently pull the earmold
outward. Pulling down on
the earlobe may help loosen
the earmold as it is removed.
EARMOLD INSERTION AND REMOVAL
To preserve battery life, it is recommended that you
turn your instrument “off” any time it is not in use.
Open the battery compartment to turn the
instrument off.
The volume control enables you to adjust the amount
of amplification provided by the instrument.
You may wish to change volume levels as you
encounter different listening situations. To change
the volume, use your fingertip to rotate the vertical
volume control. Your hearing instruments may
“beep” when you reach the correct setting.
To Next Page
Loading...
