Starkey Evolv AI - Charging Your Hearing Aids

Charging Your
Hearing Aids
• Place your hearing aids in the
charger with the earbuds or earmolds resting
inside the reservoir.
• Your hearing aids will turn off automatically
and begin to charge, as long as your charger
is powered; Standard charger requires external
power source (i.e. wall outlet).
• Your hearing aids will automatically power on
when removed from the charger; Standard charger
requires external power source (i.e. wall outlet).
• Note: The LEDs corresponding to each
hearing aid:
– Glowing Green = Charging
– Solid Green = Fully Charged
– Blinking Red = Fault State. To reset, remove
the hearing aids from charger, wait until LED
turns off and re-insert aids. If Fault State
continues, call your hearing professional.
• Charging occurs with the lid open or closed;
hearing aids will be fully charged in under
31/2hours.
• It is safe to store hearing aids in the charger after
they are fully charged and any time that you are
notwearing them.
• If you will not be wearing your hearing aids for an
extended period of time (i.e, weeks), remove both
the plug from the charger and the hearing aids
from the charging ports. You will need to manually
power off the hearing aids by pressing the user
control on each hearing aid for three seconds.
Youmay store them in the reservoir.
• The desiccant puck provided will be effective for
3–6 months depending on moisture in the hearing
aids and humidity. When the desiccant puck fades
from blue to white, it should be replaced.
4 5
Ask your hearing professional about our
pocket-sized Mini Turbo Charger that provides
a 3.5-hour charge in just seven minutes.