StarLine S9 v2
42
• in remote key operation modes menu
• emergency disarm code entry
Automatic exit from service mode
If this option is enabled in system conguration then system
automatically turns from Service mode to Waiting for authorization at
congured event and ignition On.
If authorization successfully passed then system turns to Disarmed.
If authorization failed then system triggers Alarm and activates engine
blocking.
This option requires owner authorization, embedded sensors
and vehicle speed from CAN bus to be enabled in system
conguration.
Immobilizer mode
Immobilizer mode prohibits unauthorized drive attempt.
Depending on settings system waits for owner authorization with a tag
or remote in detection range or PIN code entered with factory buttons
after every disarming or every ignition switching O and at next ignition
switching On.
PIN code can be entered with factory buttons only when ignition is
switched On.
If authorization is not passed within 1 min, then engine will be stopped at
a drive attempt for 1 min or until successful authorization passed.
Remote engine start
The feature allows to make remote and automatic engine start and stop
to warm up or cool down vehicle interior to a comfortable temperature
and warm up engine before a trip.