User manual
43
Preparation of a vehicle with manual transmission for remote and
automatic engine start.
If vehicle is equipped with manual transmission, then system must
be set to “Program neutral” state to prepare for further safe remote or
automatic engine start in following procedure:
• tighten parking brake at engine running
• remove key from ignition barrel, engine continues running, service
button LED will light up permanently
• leave vehicle, shut doors, hood, trunk and arm security system.
Engine will be stopped.
• system turns to Armed
• “N” (program neutral) icon is indicated on remote key display and
StarLine app main screen
• system and vehicle are now ready for remote and automatic engine
start.
If any door is open or ignition is switched On after setting to
Program neutral, then remote and automatic engine start will
be denied until Program neutral procedure is executed again.
Vehicle equipped with automatic transmission must be switched to
Parking position in order to prepare it for remote or automatic engine
start.
Engine start
Remote engine start can be activated by one of following ways:
• 3 x Lock command from factory remote control (if supported for
particular vehicle model and enabled in system conguration)
• SMS-text command 2121
• voice call menu command 2121
• command from StarLine mobile app
• command from starline.online personal account
To Next Page
Loading...
