Starline S9v2 - Page 45

User manual
45
Drive after remote start without engine stop (ignition takeover)
To start driving after remote / automatic engine start without engine stop
make following depending on engine control system:
• for vehicles with ignition barrel:
• disarm security system
• insert key into ignition barrel and turn it to ignition On
• start driving
• for vehicles with PTS (push-to-start) button
Option 1:
• disarm security system
• press and hold brake pedal for 3 sec
Option 2:
• disarm security system
• push PTS button 1 or 2 times
Learn ignition takeover support and particular procedure from
your StarLine installer.
Parking heater (preheater) control
This feature lets warm up engine and/ or interior before a trip with remote
and automatic activating parking heater and auxiliary heater.
Parking heater can be started manually in following ways:
• sequential pushing remote key buttons
1
2
• SMS text command 221221
• command from StarLine mobile app
• command from starline.online personal account
Default parking heater run time at manual activation is 20 min
and can be adjusted in system conguration.
Factory and optional parking heater may have embedded
primary factory settings, dier from those congured in system
settings.