StarLine S9 v2
46
Parking heater run time can be extended with sending repeated
activation command.
Parking heater can be stopped manually in following ways:
• sequential pushing remote key buttons
2
2
• SMS text command 220220
• command from StarLine mobile app
• command from starline.online personal account
Parking heater can be automatically started before remote and automatic
engine start on events and terms set in system conguration.
Parking heater can be started automatically in following terms:
• by engine temperature – parking heater is started when engine
temperature is below the set value
• by timer – parking heater is started at a set time
Temperature and time for parking heater activation can be set in:
• remote key operation mode menu
• StarLine mobile app
• starline.online personal account
Parking heater is stopped when the set engine start temperature (for
automatic engine start) or the set parking heater run time is reached and
engine will be started then.
Default parking heater automatic run time is 20 min. It can be extended
by sending heater start command again.
Intelligent turbotimer
Turbotimer option is used to temporary continue engine running after
a trip to cool down turbo charger and extend its lifetime.
The option must be initially enabled and programmed while
installation.