Need help?Do you have a question about the Starrett MVR200 and is the answer not in the manual?
General| Resolution (µm) | 0.5 µm |
|---|---|
| Optics | Zoom lens |
| Resolution (inches) | 0.00002 in |
| Light Source | LED |
| X-Y-Z Travel (in/mm) | 8 x 4 x 8 in / 200 x 100 x 200 mm |
| Illumination | LED |
| Software | MetLogix M3 |
| Camera Type | Color CCD |
| Output | USB |
Explains safety symbols and terms used in the manual for user safety.
Explains the operator controls and electrical connection points of the system.
Instructions for quickly changing optics assemblies on MVR systems.
Steps to mechanically level the stage glass for accurate measurements.
Details general, electrical, and mechanical safety precautions for users.
Details the electrical connections and power adapters for the system.
Information on post-installation testing, calibration, and operator training.
Overview of verifying zoom optics alignment for measurement accuracy.
Checks parfocality and focus of zoom optics across magnification.
Verifies that features remain centered during magnification changes.
Checks camera alignment relative to stage motion for accuracy.
Procedures for verifying system calibration using standards.
To Next Page
