Starrett MVR200 - Operator Controls and Electrical Connections

- 7 -
3.1 MVR200 & MVR300 System Components
MVR200 benchtop vision metrology system
3.2 Operator Controls and Electrical Connections
Operator Controls on Left Side
Hand wheel with crank for X-axis motion
Three-position toggle switch for fine/coarse speed
control of Z-axis travel.
Video probe with
video camera
and telecentric
or zoom optics
Bayonet mount
for quick-change
optics (if ordered)
LED surface
illumination
X-Y stage with
LED substage
illumination
Hand wheel for
manual X-axis
travel
Three-position
toggle switch for
fine/coarse speed
control of Z-axis
travel
Machined Z column
with plastic cover.
Houses all electronics
other than touch-screen
PC.
200 mm (8”) of
motorized vertical
Z-axis travel
Knob for X-axis travel
Granite base
Hand wheel for Y-axis
travel
Proportional speed
control switch for up-
down Z-axis travel