Starrett S8010 - Page 115

S8010
115
ENGLISH
VARIABLE SPEED:
DIRECTION OF ROTATIO SELECTOR:
When pressing the Trigger Switch, there is an increase of the speed proportionally to
the pressure increase on the switch. Releasing the pressure on this button
reduces the speed proportionally (fi gure 03).
The direction of rotation of the machine is reversible and is controlled with
a Selector located above the Trigger Switch (fi gure 04). With the Drill/Driver
held in normal operating position:
1. POSITION the Direction of Rotation Selector to the left of the power
tool to adjust on NORMAL position;
position:
REVERSE
function:
REVERSE
position:
NORMAL
function:
DRILLING
FIG 04
2. POSITION the Direction of Rotation Selector to the right of the power
tool to adjust on REVERSE position;
3. POSITION the Direction of Rotation Selector in the center (LOCK) of the
power tool to reduce the risk of the possibility of accidental running when
not in use.