S8010
116
ENGLISH
WARNING: The Drill/Driver will not run unless the Direction of Rotation
Selector is engaged fully to the left or right.
FIG 05
To STOP the shaft of the Drill/Driver, RELEASE the Trigger Switch and ALLOW
the Chuck to come to a complete stop.The Electric Brake will engage and
act quickly and automatically when released the Trigger Switch.
CAUTION: To prevent gear damage, ALWAYS ALLOW the Drill/
Driver to come to a complete stop before chang-
ing the direction of rotation.
ELECTRICAL BRAKE:
BELT CLIP
BELT CLIP INSTALLATION:
To Next Page
Loading...