Startco Engineering Ltd. Page 41
FPU-16 Feeder Protection Unit Rev. 1
Pub. FPU-16-M, November, 1997 Downloaded from the Internet, see Disclaimer.
FPU-16 MANUAL COMPATIBILITY
Startco Engineering Ltd. constantly strives to improve its products. These product
improvements are upwardly compatible so that a unit can be replaced by a unit of more
recent manufacture. As features or enhancements are incorporated, the manual is
revised to reflect the changes made. It is important that the manual revision
corresponds to both the FPU-16 revision level and the firmware revision level.
The FPU-16 revision level is shown on its nameplate and the firmware revision level is
accessed by selecting Mode 8 and pressing ENTER. The manual revision level is
listed on the manual title page.
MANUAL REVISION LEVELS
REVISION LEVELS
FPU-16 FIRMWARE MANUAL COMMENTS
60 Hz 50 Hz 60 Hz 50 Hz
0 50 0 50 0 Initial release.
0 50 0 50 1 Minor manual changes.
0 50 0 50 2 Manual changes, dc power supply added.
TABLE 4
To Next Page
Loading...