Startec S.R.L. RAIN 260 Plus User Manual

Programming
5
3. PROGRAMMING the SECTORS and the SUPPLEMENTARY
FEATURES
The sectors can be used and modified only if a unit equipped with the PLUS options is employed. The sectors must be
enabled for users.
This part specifies how to modify the number and the data of the sectors in the menu so that they can be saved and
displayed at the outset of every irrigation cycle.
Data may also be modified directly, without entering the menu. In this case the adjustments are set for the current cycle
and, at the following one, the data stored in the menu are redisplayed.
SECTOR Number 0
If sector number = 0 [NumSET 0] is programmed, NO supplementary features will be performed and the keys will operate
in normal mode as described in the main instructions for RAIN 260
SECTOR Number 1
If sector number = 1 [NumSET 1] is programmed, supplementary features MAXIMUM DURATION and INITIAL
HOLDING TIME will be performed, by repeatedly pressing _h_ and adjusting the displayed entry with the central + and
– keys.
SECTOR Numbers from 2 to 8
If sector numbers from 2 to 8 and their respective data are programmed, by repeatedly pressing _h_ the supplementary
features MAXIMUM DURATION and INITIAL HOLDING TIME will be performed and by repeatedly pressing _m_ the
SECTORS features will be performed with the possibility of viewing data.
The supplementary features’ entries can be modified with the central + and – keys.
3.1 Premise: double function of the + and - keys.
Keys in the _+_ and _–_ group have a dual function which becomes active when you access a menu..
As you may notice, these keys have a symbol depicted at lower right. This symbol indicates their dual
functionality.
UP ARROW
ESCAPE _ESC_ _^_, _ENTER _, ENTER
LEFT ARROW _<_, _v_ _>_. RIGHT ARROW
DOWN ARROW
TASTO FUNZIONE
ESCAPE _ESC_
cancel operation
ENTER _ENTER _
when pressed once, lets you modify the parameter You can tell when the parameter can
be modified, because the * (asterisk) appears on the display
- When ENTER is pressed a second time, the change is confirmed and the asterisk
disappears.
FRECCIA SU _^_
modifies upwards by one unit
FRECCIA DESTRA _>_
modifies upwards by one tenth
FRECCIA GIU _v_
modifies downwards by one unit
FRECCIA SINISTRA _<_
modifies downwards by one tenth
Note: keeping the ARROW key pressed raises the speed of increase or decrease.
During navigation through the menus, when the display shows a full row of dots along the bottom, e.g.

Startec S.R.L. RAIN 260 Plus Specifications

General

Brand	Startec S.R.L.
Model	RAIN 260 Plus
Category	Measuring Instruments
Language	English