Startec S.R.L. Rain Speed 060 - 3.6. End of Irrigation Cycle

R
RR
A
AA
I
II
N
NN
0
00
6
66
0
00 Irrigation cycle
11
3.6. End of Irrigation Cycle
Rain 060 can be programmed to stop winding the pipe in case the winding is set up to stop ( m/h = 0) when
the metres are lower than the programmed parameter (default = 10m), after a while it displays [ <- m 0]
. Now it is ready for a new unrolling and irrigation.
To start a new irrigation cycle, switch off and then restart the Rain Star 060 control unit.