StarTech.com TB3DOCK2DPPD - Connect Multiple Thunderbolt 3 Displays in a Daisy Chain; Supported Video Resolutions

7
Connect an active adapter to the DisplayPort port
You can also connect a display adapter to the docking station’s DisplayPort port to
connect a dierent type of monitor.
Note: This port does not support Multimode DisplayPort so an active adapter is
required.
Notes:
• The docking station lets you connect two 4K displays.
• Video adapters sometimes limit the maximum available resolution. Check the
documentation of the video adapter to determine its maximum supported
resolution.
Connect multiple Thunderbolt 3 displays in a daisy chain
You can also set up dual displays using multiple Thunderbolt 3 displays in a daisy-chain
conguration.
Example: You can connect a Thunderbolt 3 display to the Thunderbolt 3 USB-C port
port on the docking station. You can then connect another Thunderbolt 3 device, such
as a second Thunderbolt 3 display, through the rst Thunderbolt 3 display.
Instruction manual
Visit www.StarTech.com for a range of USB-C video adapters, active DisplayPort adapters and cables.
Type of Display Adapter Needed (sold separately)
HDMI DisplayPort to HDMI 4K Audio / Video Converter (DP2HD4KS)
DVI DisplayPort to DVI Adapter (DP2DVIS)
VGA DisplayPort to VGA Adapter (DP2VGA2)