Stat Fax 303 Plus - Keyboard Functions

10 Stat Fax 303 Plus Operator’s Manual Rev. J Awareness Technology, Inc.
1.7 Keyboard Functions
T
h
e
B
L
A
N
K
The numeral keys serve several functions. As numbers, they are used to enter test parameters,
and to make filter selections. Any key serving multiple functions will respond to the displayed
request for information.
ABS, STND, CUT, MULT, %ABS, and UPT, are the keys used to select a mode of operation.
ABS stands for Absorbance Mode.
STND stands for Calibrator (Single Standard) Mode.
CUT stands for Cutoff Mode and offers two choices: Cutoff Control, and Cutoff mode with
Reverse Cutoff option.
MULT stands for Multi-Standard Mode and offers two choices: regression (including linear, log,
and log-logit), and point-to-point connection.
%ABS stands for Percent Absorbance Multi-Point Mode.
UPT stands for Uptake Mode.
Pressing the INTRP key causes the reader to ask for positive and negative cutoff points to be
used for automatic sample interpretation.
Pressing the CNTRL key causes the reader to ask for the locations and acceptance criteria of
high and low controls to be used for automatic labeling.
The ENTER key is used to tell the instrument when
you are finished entering information
The AUX ke
y
is used to turn the lam
p
on and off.
The CLEAR key is used to erase a typing error
when information is being entered by keyboard.
Pressin
g
twice
q
uits the mode.
The PAPER key advances the printer paper
f
o
rw
a
r
d
o
n
e
lin
e
eac
h
t
im
e
i
t
i
s
p
r
essed
.
The ALT key is used to enter a negative sign and
to access a list of alternate functions such as
saving and deleting tests, setting the clock, and
c
h
oos
in
g
8
o
r 12 w
e
ll
st
ri
ps
.
The MENU key is used to access tests stored in the It is
also used to enter a decimal point for numeric entries.
The BLAN
K
key allows automatic blank
on well A-1 in the ABS Mode.