4 Stat Fax 303 Plus Operator’s Manual Rev. J
Awareness Technology, Inc.
1.4 Safety Precautions
To assure operator safety and prolong the life of your instrument, carefully follow all instructions
outlined below.
Read Instructions
Review the following safety precautions to avoid injury and prevent damage to this instrument or
any products connected to it. To avoid potential hazards, use this instrument only as specified.
For best results, familiarize yourself with the instrument and its capabilities before attempting any
clinical diagnostic tests. Refer any questions to your instrument service provider.
Servicing
There are no user-serviceable parts inside the instrument. Refer servicing to qualified service
personnel. Use only factory authorized parts. Failure to do so may void the warranty.
Personal Protective Equipment
Many diagnostic assays utilize materials which are potentially biohazardous. Always wear
protective apparel and eye protection while using this instrument.
Follow Operating Instructions
Do not use the instrument in a manner not specified by the manual or the protection provided by
the instrument may be impaired.
Use Proper Power Cord
Use only the power cord specified for this product and certified for the country of use.
Ground the Product
This product is grounded through the grounding conductor of the power cord. To avoid electric
shock, the grounding conductor must be connected to earth ground. An alternate method is to
attach a ground strap from the external grounding terminal on the rear panel of the instrument to
a suitable ground such as to a grounded pipe or some metal surface to earth ground.
Observe All Terminal Ratings
To avoid fire or shock hazard, observe all ratings and markings on the instrument. Consult this
manual for further ratings information before making connections to the instrument.
Install as Directed
The Microstrip Reader should be installed on a sturdy, level surface capable of supporting the
instrument’s weight of 13 lbs (5.9 kg) safely for safety and ventilation purposes. The mounting
surface should be free of vibrations.
Provide Proper Ventilation
Refer to the installation instructions for details on installing the product so it has proper
ventilation. The instrument should be surrounded by the following clearances: 8 cm around
perimeter of unit and 8 cm on top.
Do Not Operate Without Covers
Do not operate this instrument with covers and panels removed.
To Next Page
Loading...