RESIDENTIAL
State Select
®
gas water heaters feature patented C3
®
Technology
design, which meets the ANSI Z21.10.1-CSA 4.1 standards for
flammable vapor ignition resistance. Select water heaters are
available in a variety of heights which can accommodate situations
with limited installation space.
Diffuser Dip Tube
• Reduces lime and sediment buildup, maximizes hot water output
• Made from State PEXAN
™
, a cross-linked polymer that can withstand
long-term exposure to temperatures up to 400ºF
Green Choice
®
Gas Burner
• Patented design reduces NOx emissions up to 33%
• Complies with Southern California and Texas requirements
Easy-to-Light Piezo Ignitor
• For fast “one-hand” pilot ignition
• Standard on all C3 Technology models
Glass-Lined Tank with Aluminum Anode Rod
• For long-lasting protection against rust and corrosion
Durable Brass Tamper-Resistant Drain Valve
Factory-Installed Temperature & Pressure (T&P)
Relief Valve
Design-Listed by CSA International
• Certified at 300 PSI test pressure and 150 PSI working pressure
• Listed according to ANSZ21.10.1-CSA 4.1 standards governing storage-type
water heaters
• Additional code compliance: UBC, CEC, SBCC, CABO, HUD, BOCA National
Codes and 2004 NAECA
C3 Technology
®
Gas Water Heater Design – See other side
6-Year Limited Tank and Parts Warranty
• Consult written warranty or contact State Water Heaters for
complete information
SELECT
®
Residential Gas Water Heaters
For more information on Select
®
contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SRGSS01206 January 2008R
190164_SRGSS01206.indd 1 1/16/08 12:13:02 PM
To Next Page
Need help?
General
