8
CLEANING AND MAINTENANCE
Before cleaning and maintenance ensure the appliance is disconnected from the mains electricity
supply.
Important: Do not allow moisture or liquids to get into the appliance.
Important: Do not use abrasive cloths, powders, household cleaners, bleach or wax polish to clean
the appliance as these can damage the appliance.
Cleaning the Exterior
• Use a clean, damp soft cloth with a little washing up liquid to wipe the exterior surface of
the appliance and dry thoroughly.
• Dry the appliance thoroughly with a clean dry cloth before connecting into the mains
electricity supply.
Cleaning the Filter
• Remove the lter by pushing in the catch on the underside of the lter, the lter can now
be removed.
• Wash the lter in warm soapy water, soaking may be necessary to help remove all the grease.
Ensure to remove all excess soap with warm water, regular washing is recommended to prevent
grease build up.
• Let the lter thoroughly dry before reinstalling in appliance.
Important: The lter may discolour after continued use or washing, this is not a cause for alarm and
the lter does not need to be replaced.
Carbon Filter
Two carbon lters can be added to the appliance (these are not included).
• Remove the metal lter by pushing in the catch on the
underside of the lter.
• Place the carbon lters on either end of the motor and
turn in a clockwise direction to lock
and anti-clockwise to remove.
• Carbon Filters are optional extras, they are available to be
purchased from Statesman Spares Department.
• Carbon Filters are neither washable nor reusable.
To Next Page
Loading...
