Nombre del Producto modelo
38
Fix the rail to the frame or ceiling using the supporting brackets provided
(Fig. 5), and leaving a 30mm minimum distance between the highest point
the door will reach during its motion and the operation rail (Fig. 6). Make
the correct measurements to attach the operator-rail assembly to the
ceiling with the supporting brackets (Fig. 4-F), shorten them if necessary.
Notice
Ensure that the operator is anchored in concrete and not in plaster.
Before attaching the rail to the motor, unscrew the nuts on each
support bracket (D-6mm). Attach the guide to the motor, fix it
with the brackets (Fig. 4-E), and tighten the nuts firmly.
To Next Page
Loading...