EasyManua.ls Logo

Steak Locker SL-103 - Routine Maintenance and Troubleshooting; Routine Maintenance Procedures; Operating Problem Solutions

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING PROBLEMS
8.1 Start-Up:
Compressor does not start even though the desired temperature is lower than the temperature in the room, do
the following steps:
1. Check the wall socket by plugging in any type of electrical device,
2. Unplug the socket and contact your dealer if the compressor still not starts.
8.2 Dew on the surface of cabinet
The surface of cabinet especially the glass door will appear some frost if the cabinet is installed in a damp room.
This is due to the moisture in the air coming into contact with the cabinet. Please wipe it away with dry cloth.
8.3 Liquid sound
1. The sound of compressor when starts or stops working.
2. The rattling noise may come from the flow of the refrigerant, which is normal.
3. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your machine.
8.4 Condensation formed inside the cabinet
If the machine is in the environment with high level of humidity or the door of your cabinet has been left open for a
long period or opened frequently, wipe off the door and the cabinet walls and leave the door closed as long as
possible.
ROUTINE MAINATINENCE
Your cabinet is easy to operate and has proven its reliability; it will provide long-lasting satisfaction if you follow
the simple maintenance and cleaning operations listed below:
---Replace the activated charcoal filter in the upper ventilation hole of the cabinet half a year (Your dealer keeps
this accessory in stock).
---Remove the dust from the condenser (metal screen on the back of the cabinet) twice a year.
---Make sure the power cord is unplugged before cleaning the back of your cabinet or before moving it.
---Clean the inside of your cabinet thoroughly once a year, after unplugging and unloading it (use water and a
mild cleaning product, then rinse carefully).
To assure that your cabinet provides long-lasting service, you should check it regularly and inform
your dealer if you note anything unusual.
Refittheslidingshelfasshownbelow:
6 7 w w w . s t e a k l o c k e r . c o m