www.stealthcam.com
Toll Free 877-269-8490
21
SettingtheTimeOutModeinPIRoperationmode:
YourStealthCamcanbeprogrammedtosettheamountoftimein
secondsorminutesthecamerawillsleepbetweenPIRtriggers.
• SwitchthecameratotheONposition.
¾ LCDscreenwilldisplaythecamerastatusscreen.
• Pressthe[MENU]buttononcewithin30secondstoenter
the
programmingmode.
• ThewordPIRwillbeblinking,press[OK]toconfirmthecamera
operationbyPIRdetection.
• Press[UP]buttonFOURtimestoenterTimeOutsettingmode.
• ThewordTIMEOUTwillbeblinking.
• Press[OK]buttonandtheSECONDSdigitswillbe
blinking.
• Press[UP]or[DN]buttontoincreaseordecreasethetimevalue
insecondsfrom0to59secondsin1secondincrements.
• Press[OK]tosavethesecondssettingandtheMINUTESdigitswill
beblinking.
• Press[UP]or[DN]buttontoincreaseordecrease
thetimevalue
inminutesfrom0to59minutesin1minuteincrements.
• Press[OK]tosavetheminutessetting.
• You’llthenseetheword‐TIME‐blinking.
• Press[MENU]buttontoexit.
www.stealthcam.com
Toll Free 877-269-8490
22
SettingtheTimeandDateinPIRoperationmode:
YourStealthCamusesthe24hrmilitarytimeformat.
• SwitchthecameratotheONposition.
¾ LCDscreenwilldisplaythecamerastatusscreen.
• Pressthe[MENU]buttonwithin30secondstoenterthe
programmingmode.
• ThewordPIRwillbeblinking,pressOKtoconfirmthe
camera
operationbyPIRdetection.
• Press[DOWN]buttonTWOtimestoenterTimeandDatemode.
• ThewordTIMEwillbeblinking.
• Press[OK]toenterMinutesettingfirst.
• TheMINUTEdigitswillbeblinking.
• Press[UP]or[DN]toincreaseordecreasetheminute
value
(00–59).
• Press[OK]tosaveyourselectionandenterHoursetting.
• TheHOURdigitswillbeblinking.
• Press[UP]or[DN]toincreaseordecreasethehourv a lue
(00–23).
• Press[OK]tosaveyourselectionandenterMonthsetting.
• The
Monthdigitswillbeblinking.
• Press[UP]or[DN]toincreaseordecreasetheMonthvalue.
(1‐12).
www.stealthcam.com
Toll Free 877-269-8490
23
• Press[OK]tosaveyourselectionandenterDaysetting.
• TheDaydigitswillbeblinking.
• Press[UP]or[DN]toincreaseordecreasetheDayvalue.
(01–31).
• Press[OK]toconfirmtheDatesettingandenterYearsetting.
• TheYEARdigitswillbe
blinking.
• Press[UP]or[DN]toincreaseordecreasetheYearvalue.
(01–99).
• Oncethisisalldone,press[OK].
• You’llthenseetheword‐dEL‐blinking.
• Press[MENU]buttontoexittheprogramsettingandbacktothe
statusscreen.
www.stealthcam.com
Toll Free 877-269-8490
24
SettingtheTimeLapseMode:
FIRST, you need to make sure the Program Control Switch is in the
CUSTOMposition.TheTime LapseDefaultsettingvalueisfrom18:00
to8:00thenextday.Whenthecameraissettotimelapsemode,the
program setting will bypass any PIR activation. Instead, the user can
set
the program for a pre‐determined time period [such as 6:00 to
18:00].Theuserthensetsthefrequencyofpicturesonly(NOTvideos)
during this time period [such as one picture every 10 seconds]. The
camerawillremaininTimeLapsemodeuntiltheuserhaschangedthe
program
setting.
• SwitchthecameratotheONposition.
¾ LCDscreenwilldisplaythecamerastatusscreen.
• Pressthe[MENU]buttononcewithin30secondstoenterthe
programmingmode.
• Press[UP]buttonuntilyouseethe
wordtLSblinking.
• Press[OK]toconfirmandgo
intoTLS
Mode"StartTime"setting.
• ThedisplaywillshowTIME+S88:88
(S=Start,88:88=timeinHH:MM)
• Press[OK]tosetthe“StartTime”
setting.Atthispointyoucanadjustthe
timefrom00:00to23:59.
• TheMINUTEdigitswillbeblinking.