WWW.STEALTHCAM.COM
Toll Free 877-269-8490
9
QUICKSTARTGUIDE
Thisguideis designedto get youupand runningin amatterofmoments.To
get the most out of this advanced scouting tools, please read the manual
thoroughly before operating the camera. If you would like to modify any of
thefactoryDefaultSettings,exceptfortheTime&
Date,pleaseseemanualfor
instructions.
FACTORYDEFAULTSETTINGS:
TimeOut:30Seconds VideoMode:10Seconds
Resolution:StillImage(1.3Mp)/Video(VGA) BurstMode:1StillImage
CameraSet‐up:
1. Install8“AA”cellbatteriesincorrectpolarity(+/‐)asindicatedinbattery
compartment.
2. InsertSDcardintothecamera.
3. TurnpowerontoadjustTimeandDate.
SetTime&Date:
1. SwitchthecameratotheONposition.
2. Pressthe[MENU]buttontoentermenusettingsscreen.
3. Pressthe [UP] or [DN] button to scroll through different setting modes
untilthewordTIMEblinking.
4. Pressthe[OK]buttontochoosetheTimesettings.
5.
Pressthe[UP]or[DN]buttontoadjusttheMinutesettingandpress[OK]
toconfirmandmovetotheHoursetting.
6. RepeattosetHourandthenpress[OK]toconfirmandmoveto Date.
7. AdjusttheMonth,Day,andYearbyusing[UP]or[DN]button.
Eachtime
youfinishanadjustmentyoumustpressthe[OK]bu ttontoconfirmand
movetothenextfieldforadjustment.
8. Oncedone,theword‐dEL–willbeblinking.
9. Pressthe[MENU]buttontoexitandstartusing.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
10
BATTERYANDMEMORYINSTALLATION
Your Stealth Cam Advanced Digital Scouting Camera is designed to
operateusingtwodifferenttypesofbatterypoweroptions.
Batteries“AA”cell
The internal battery compartment accepts 8 “AA” cell batteries.Be
sure to use high quality brand name alkaline batteries.Install
batteries with correct polarity (+/‐) as noted inside the battery
compartment.
12VLeadAcidexternalbattery
The camera is equipped with an external power jack designed to
acceptabarrelplugcableattachedtoasealedleadacidbattery.(Sold
separately).Batterycableandcomplete12VLeadAcidbatterykitsare
available wherever Stealth Cam scouting cameras are sold or call toll
free 877‐269‐8490.Only
Stealth Cam externalbattery accessories are
recommended.
• MakesurecameraisintheOFFposition.
WARNING: Do not use different Voltage lead acid battery other than
the one specified in this section. Doing so will damage the camera
and will void the warranty.
WARNING: ALWAYS have the camera in the OFF position when
installing or removing batteries and memory card. Removing batteries
or memory card while the camera is ON may damage the camera.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
11
• InserttheexternalbatterybarrelplugintotheDC12Vjackonthe
bottomofcamerahousing.
• Turnthecamerapoweron.
NOTE: Please make sure the voltage and polarity (+/‐) are correct
beforeconnection.Incorrectvoltageorpolarity(+/‐)willdamagethe
camera. When both internal and external batteries are connected,
thecamerawilldrawpowerfromthehighervoltagesourcefirst.
MemoryOptions
The camera is also equipped with an expandable media card slot
capableofacceptingupto16GBSD card with Class6orbelowspeed
rating (sold separately). The front counter display will show the
numberofimagesstored ontheSD card.IfnoSD cardisinsertedthe
front
counterdisplaywillshow“NOSd”.
WARNING: The above camera will not accept Class 10 or above
speed rating SD memory cards.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
12
InsertingSDmemorycard
NOTE:Make surecamera is in the OFF position whenever adding or
removingmemory.
• InsertSDmemorycardintotheSDcardslotcompletelyandinthe
correctdirectionasshownbythestickerlocatedatthesideofthe
housing.
• ToremovetheSDmemorycard,depresstheSDcardandpullout
thecardgently.
• SDcardsmustbe
clean(noimagesfromothersources).Ifyouare
usingtheSDcardfromothercameras,pleasemakesuretoformat
the SD card in your computer prior to use in your camera.New
cardsaregoodtousestraightfromthepackage.
FORMAT – Definition: When you format a SD memory card, the
operating system erases all information and files on thecard. Then it
creates an internal address tables that it later uses to locate
informationandfiles.FormattingalsoremovesallHiddenSystemfiles
aswell.BasicallyitcleansyourSD
memorycardjustlikeifitwasbrand
new.Pleasemakesuretofollowtheguidelineslistedbelow:
SDCardsize:2Gborbelow,formatusingFileSystemtype“FAT”.
SDCardsize:4GBorabove,formatusingFileSystemtype“FAT32”.
DonotuseFileSystemtype
“NTFS”or“exFAT”,theseformatsarenot
supported.
To Next Page
Loading...
Need help?
General
