Steamfast MODEL SF-140 - Microfiber Cloths

as s e m b L I n g t h e
S
t e a m mo p
8 Top Innovations
MICROFIBER CLOTHS
1. Lay one Microber Cloth on at surface, with two velcro strips facing upward.
2. Align Mop Head above Microber Cloth. Make sure Mop is oriented with Cloth as shown, and
centered as best as possible (FIGURE 2-A).
3. Press Mop Head rmly down onto Microber Cloth. Velcro strips will adhere to Pad Grips on
underside of Mop. Cloth should now be attached and ready for use (FIGURE 2-B).
4. To remove, use your foot to press down on Microber Cloth release tab while simultaneously
pulling Mop Head up off of Cloth.
CAUTION: Use care when handling a recently used Microber Cloth, as it may still be hot.
NOTE: Dirty Cloths may be washed and re-used. They are machine washable, and should be
allowed to air dry before use. Additional Microber Cloths may also be purchased through
the Top Innovations Web site (www.steamfast.com), or by contacting Customer Service
directly (refer to Page 14 for details).
FIGURE 2
A B