ENGLISH
|
5
• The 10' Steam Hose (1) safely channels the flow of steam from the Boiler to the
Steam Nozzle.
• The Boiler Cap (2)
is designed to safely contain steam inside the Boiler. The Boiler Cap must
be unscrewed and removed in order to fill the Boiler with water.
• The Steam Handle Cradle (3)
functions as a convenient holder for the Steam Nozzle.
• The Cord Wrap (4)
neatly stores the Power Cord.
• The Illuminated On/Off Switch (5)
illuminates when the unit is powered On.
• The Steam Nozzle (6)
emits a flow of hot, penetrating steam whenever the Steam Trigger is
pressed and held.
• The Steam Trigger Lock (7)
locks Steam Trigger to "On" position for continuous steam.
• The Steam Trigger (8)
is pressed and held in order to start the flow of steam from the Steam
Nozzle, then released when you wish to stop.
• The Steam Adjustment Knob (9)
is conveniently located on the handle to adjust the intensity
of the steam at your fingertips.
• The On-board Accessory Storage (10) neatly stores brushes and nozzles on the unit.
• The Heating Indicator Light (11) Illuminates while the Boiler is heating, then turns off when
the unit is ready to begin steaming.
To Next Page
Loading...
